ATX
If the power switch is turned on or the power cord plugged in, then the fan is silent, all the voltage at the socket when measured using a voltmeter to zero, except on pin 9 is +5 V as a voltage source to the standby position. If pin 14 is connected momentarily to the pin 9 by means of a cable, then the fan will spin, the voltage on each pin of socket 20 when measured using a voltmeter is as in Table 9. Especially for power good signal when measured with a voltmeter to voltage +5 V for a moment and then drop to near 0V when power is turned on.
Output Voltage Type ATX Power Supply
Pin 1 | Pin 2 | Pin 3 | Pin 4 | Pin 5 | Pin 6 | Pin 7 | Pin 8 | Pin 9 | Pin 10 |
3.3V | 3.3V | Gnd | 5V | Gnd | 5V | Gnd | P_OK | 5VSB | 12V |
Oran | Oran | Blk | Red | Blk | Red | Blk | Gray | Purp | Yell |
Oran | Blue | Blk | Green | Blk | Blk | Blk | White | Red | Red |
3.3V | -12V | Gnd | P_ON | Gnd | Gnd | Gnd | -5V | 5V | 5V |
Pin 11 | Pin 12 | Pin 13 | Pin 14 | Pin 15 | Pin 16 | Pin 17 | Pin 18 | Pin 19 | Pin 20 |

Tidak ada komentar:
Posting Komentar